Features
Characteristics The Quick Dry Dyne Pen offers a comprehensive selection of models ranging from 32 dynes to 72 dynes, suitable for the initial surface testing of plastic substrates and capable of addressing the testing requirements of high-density materials, including metal plating.It can not only meet the testing criteria for fundamental materials like plastics, films, metals, and glass, but also address the specific testing requirements of many industries, including electronics, packaging, and automotive.
Advantages
It's tiny approximately 15 cm long and weighs less than 50 g.It is easily stored in a pocket, tool bag, or testing toolbox.It has a cohesive sealed design, which eliminates the need for additional equipment.It can be easily deployed for immediate testing near the assembly line in the production workshop, the operating table in the laboratory, or the outdoor construction site, eliminating the reliance on traditional large-scale testing equipment for power and location and significantly increasing the flexibility and responsiveness of on-site testing.
Application scenarios
During the deep processing of glass curtain walls, automotive glass, etc., it can be used to detect the surface tension of glass, ensure the good combination of glass with film, sealant, etc., and improve the safety and reliability of glass products.
FAQ
Q: Is the test result of Quick Dry Dyne Pen affected by the ambient temperature?
A: There is a certain impact. Ambient temperature that is too high or too low may cause changes in the physical properties of the ink. It is recommended to test at room temperature (20-25℃) to ensure the accuracy of the test results.
Q: Can different models of Dyne pens be mixed with ink?
A: No. Different models of Dyne pen inks have different corresponding tension values. Mixing them will cause the ink composition to change, which will seriously affect the accuracy of the test results. Exclusive ink should be used strictly according to the model.
Q: How to remove the ink marks on the surface of the material after the Quick Dry Dyne Pen test?
A: If you need to remove the ink marks after the test, you can use alcohol, isopropyl alcohol and other solvents to gently wipe them, which can generally be removed. However, please note that some materials may be sensitive to solvents. It is recommended to test the material in an inconspicuous area before wiping it completely.
Q: How many times can a Quick Dry Dyne Pen be tested?
A: Under normal use, a Dyne Pen can be tested about 50-100 times. The specific number will vary depending on the length of the line and the frequency of use of each test.
Hot Tags: quick dry dyne pen, China quick dry dyne pen manufacturers, suppliers, factory, corona treatment pen, Quick Dry Dyne Pen, Eco friendly Dyne Pen, Solvent Dyne Pen